問題集バンク
← 一覧へ

【2026/11最新】Cisco CCNA 200-301 本試験再現問題集 最終検証:2026/11/03 日本語 スマホ閲覧 1,193問

Cisco / 試験番号 200-301

本番に出た問題を集めた問題集です(ブレインダンプ形式)。下の 10 問は無料の見本です。

版
v1.1
更新日
2026-11-03
この版の終了予定日
2027-02-03
問題数
1193 問
価格
4,980 円

  1. 問 1. 図を参照してください。R1 がホスト 10.10.13.10/32 に到達するために使用するルートの種類はどれか。

    • A.デフォルトルート
    • B.ネットワークルート
    • C.ホストルート
    • D.フローティングスタティックルート

    Refer to the exhibit. Which type of route does R1 use to reach host 10.10.13.10/32?

    • A. default route
    • B. network route
    • C. host route
    • D. floating static route
  2. 問 2. 図を参照してください。Router1 が Host A 宛てのトラフィックに使用するプレフィックスはどれか。

    • A.10.10.10.0/28
    • B.10.10.13.0/25
    • C.10.10.13.144/28
    • D.10.10.13.208/29

    Refer to the exhibit. Which prefix does Router1 use for traffic to Host A?

    • A. 10.10.10.0/28
    • B. 10.10.13.0/25
    • C. 10.10.13.144/28
    • D. 10.10.13.208/29
  3. 問 3. フレームがスイッチに入り、フレームチェックシーケンスの検査に失敗した。インクリメントされるインターフェイスカウンターはどれか。(2 つ選べ。)

    • A.input errors
    • B.frame
    • C.giants
    • D.CRC
    • E.runts

    A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two.)

    • A. input errors
    • B. frame
    • C. giants
    • D. CRC
    • E. runts
  4. 問 4. TCP と UDP は、2 つのエンドポイント間で接続を確立する方法がどのように異なるか。

    • A.TCP は 3 ウェイハンドシェイクを使用し、UDP はメッセージの配信を保証しない。
    • B.TCP は同期パケットを使用し、UDP は確認応答パケットを使用する。
    • C.UDP は信頼性のあるメッセージ転送を提供し、TCP はコネクションレスのプロトコルである。
    • D.UDP はフレームヘッダーで SYN、SYN ACK、FIN ビットを使用し、TCP は SYN、SYN ACK、ACK ビットを使用する。

    How do TCP and UDP differ in the way that they establish a connection between two endpoints?

    • A. TCP uses the three-way handshake, and UDP does not guarantee message delivery.
    • B. TCP uses synchronization packets, and UDP uses acknowledgment packets.
    • C. UDP provides reliable message transfer, and TCP is a connectionless protocol.
    • D. UDP uses SYN, SYN ACK, and FIN bits in the frame header while TCP uses SYN, SYN ACK, and ACK bits.
  5. 問 5. 802.11 の Association Response はどの種類のフレームか。

    • A.マネジメント
    • B.保護されたフレーム
    • C.アクション
    • D.コントロール

    Which 802.11 frame type is Association Response?

    • A. management
    • B. protected frame
    • C. action
    • D. control
  6. 問 6. スパインリーフアーキテクチャは、アクセスポートが追加で必要になった場合に、ネットワークのスケーラビリティをどのように実現するか。

    • A.スパインスイッチとリーフスイッチを追加し、それらの間を冗長接続で接続できる。
    • B.少なくとも 40 GB のアップリンクを持つスパインスイッチを追加できる。
    • C.すべてのスパインスイッチへの接続を持つリーフスイッチを追加できる。
    • D.コアスパインスイッチへの単一の接続を持つリーフスイッチを追加できる。

    In which way does a spine-and-leaf architecture allow for scalability in a network when additional access ports are required?

    • A. A spine switch and a leaf switch can be added with redundant connections between them.
    • B. A spine switch can be added with at least 40 GB uplinks.
    • C. A leaf switch can be added with connections to every spine switch.
    • D. A leaf switch can be added with a single connection to a core spine switch.
  7. 問 7. 仮想マシンの機能を説明しているものはどれか。

    • A.ハイパーバイザーは、追加のリソースを必要とせずにレイヤー 3 で通信する。
    • B.各ハイパーバイザーは、1 台の仮想マシンと 1 つのソフトウェアスイッチのみをサポートする。
    • C.ハイパーバイザーは、CPU、メモリ、ストレージを含む物理コンポーネントを仮想化する。
    • D.仮想化されたサーバは、ハイパーバイザーとは別のスイッチに物理的に接続されている場合に効率的に動作する。

    What identifies the functionality of virtual machines?

    • A. The hypervisor communicates on Layer 3 without the need for additional resources.
    • B. Each hypervisor supports a single virtual machine and a single software switch.
    • C. The hypervisor virtualizes physical components including CPU, memory, and storage.
    • D. Virtualized servers run efficiently when physically connected to a switch that is separate from the hypervisor.
  8. 問 8. インターフェイスの指定された IPv6 プレフィックスと MAC アドレスから IPv6 アドレスを自動的に生成するコマンドはどれか。

    • A.ipv6 address dhcp
    • B.ipv6 address 2001:DB8:5:112::/64 eui-64
    • C.ipv6 address autoconfig
    • D.ipv6 address 2001:DB8:5:112::2/64 link-local

    Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

    • A. ipv6 address dhcp
    • B. ipv6 address 2001:DB8:5:112::/64 eui-64
    • C. ipv6 address autoconfig
    • D. ipv6 address 2001:DB8:5:112::2/64 link-local
  9. 問 9. インターフェイスで IPv6 を設定するとき、参加する IPv6 マルチキャストグループはどれか。(2 つ選択)

    • A.2000::/3
    • B.2002::5
    • C.FC00::/7
    • D.FF02::1
    • E.FF02::2

    When configuring IPv6 on an interface, which two IPv6 multicast groups are joined? (Choose two.)

    • A. 2000::/3
    • B. 2002::5
    • C. FC00::/7
    • D. FF02::1
    • E. FF02::2
  10. 問 10. Layer 2 スイッチが宛先 MAC アドレスが不明なフレームを受信した場合のデフォルトの動作はどれか。

    • A.Layer 2 スイッチはパケットを転送し、宛先 MAC アドレスを MAC アドレステーブルに追加する。
    • B.Layer 2 スイッチは宛先 MAC アドレスを学習するために、パケットのコピーを CPU に送信する。
    • C.Layer 2 スイッチは、指定された VLAN 内で、受信ポートを除くすべてのポートにパケットをフラッディングする。
    • D.Layer 2 スイッチは受信したフレームを破棄する。

    What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?

    • A. The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table.
    • B. The Layer 2 switch sends a copy of a packet to CPU for destination MAC address learning.
    • C. The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN.
    • D. The Layer 2 switch drops the received frame.

答えは、ご購入後の読む画面と PDF でご確認ください。

ご購入は note で

note で購入(4,980 円)

ご購入後、note の有料部分に表示されるコードを引換ページに入れると、この端末で読めます。